Bhp Mining Area C Production

Bhp Mining Area C Production

  • Area C mine Wikipedia

    The Area C mine is part of the Mount Goldsworthy joint venture, together with the Yarrie and Nimingarra mine, with the latter two being in care and maintenance since 2014 and 2007 respectively. BHP Billiton is the second-largest iron ore mining company in the Pilbara,

  • Country: Australia
  • Western Australia Iron Ore BHP

    At each processing hub Newman, Yandi, Mining Area C and Jimblebar the ore is crushed, beneficiated (where necessary) and blended to create high-grade hematite lump and fines products. Iron ore products are then transported along the Port Hedland–Newman Rail Line to the Finucane Island and Nelson Point port facilities at Port Hedland.

  • Engineer Scheduler, Mine Production Area C

    • Prepare the inputs to inform the short and medium term production plan and monitors execution to verify compliance to plan. Location You will be based at our ‘Area C’ mine site on an 8/6 fly-in fly-out roster. Area C is operated by BHP Iron Ore and is located approximately 100kms North West of Newman, Western Australia.

  • BHP's WAIO achieves record production Mining

    BHP Billiton’s Western Australia Staff reporter. At each mining hub Newman, Yandi, Mining Area C and Jimblebar ore from mines is crushed, beneficiated (where necessary) and blended to create high-grade haematite lump and fines products. WAIO achieved record production for the December 2016 half year as a result of the continued ramp

  • Area C Mining Atlas

    Area C is an Iron Ore Mine (Pilbara) in Australia owned by BHP Billiton, Mitsui, Iluka Resources. For more data on production, status, ownership, capex and other categories, see the data section:

  • Mine Engineer Field Engineer Iron Ore Mining

    Our Area C mine is located approximately 100kms North West of Newman, West Australia. The outstanding facilities at the FIFO village include; a fully equipped gym, swimming pool, netted cricket pitch, tennis and basketball court, beach volleyball court and recreation room including a pool table, darts, table tennis, TV and DVD player.

  • Minerals Australia BHP

    At each mining hub Newman, Yandi, Mining Area C and Jimblebar ore from mines is crushed, beneficiated (where necessary) and blended to create high-grade hematite lump and fines products. More on Western Australia Iron Ore. BHP Western Australia

  • Iluka's Iron Ore Royalty Over BHP Billiton's MAC

    Sandon Capital believes Iluka’s iron ore royalty over BHP Billiton’s Mining Area C (MAC) is worth close to A$2/share in its current form. If and when BHP Billiton decides to proceed with the development of its South Flank iron ore deposit, we believe the royalty could be worth >A$4/share to Iluka shareholders.

  • Iluka mulls over BHP iron ore royalty Australian

    31-10-2019· Iluka Resources will see an increase in iron ore production from its Mining Area C royalty with BHP through the development of the South Flank project in Western Australia. BHP’s development of South Flank includes the expansion of existing infrastructure at the Mining Area C hub, which is

  • Mining Area C reco.au

    Mining Area C is a BHP Billiton open cut iron ore mine in the iron ore rich Pilbara region of Western Australia, 120 km north-west of Newman. It is one of seven iron ore mines BHP Billiton operates in the same region, and has the capacity to produce approximately 23 million tonnes of iron ore annually.

  • Iluka mulls over BHP iron ore royalty Australian

    31-10-2019· Iluka Resources will see an increase in iron ore production from its Mining Area C royalty with BHP through the development of the South Flank project in Western Australia. BHP’s development of South Flank includes the expansion of existing infrastructure at the Mining Area C hub, which is

  • BHP Wikipedia

    BHP had better success with the giant Escondida copper mine in Chile, of which it owns 57.5%, and at the EKATI Diamond Mine in northern Canada, which BHP contracted for in 1996, began mining in 1998, and sold its 80% stake in to Dominion Diamond Corporation in 2013 as production declined.

  • Works Approval Mining Area C South Flank

    Works Approval Mining Area C South Flank 4 Maximum production / design capacity Primary crushing stations- 40Mtpa each Ore handling Plant 80Mtpa Diesel Storage 2ML (2,000kL) each facility Location of all infrastructure associated with the Works Approval: Mining Area C prescribed premise (seeFigure1.2 and Attachment 0)

  • Tracy Hamilton Production Trainer Assessor

    Production Trainer Assessor BHP Mining Area C. May 2012 Present 7 years 8 months. Pilbara. Production Technician BHP. May 2012 Present 7 years 8 months. Mining Area C. Dump Truck Operator Water Cart Operator D10T and D10R Track Dozer Operator Cat 988H Loader Operator Learning Cat 16H Grader

  • Titel: BHP Production Trainer Assessor
  • BHP South Flank Iron Ore project

    As a high-grade deposit, which enables the business to utilise existing infrastructure at Mining Area C, South Flank is the selected long term option to replace this production. The South Flank deposit is located approximately 130 km by road north-west of the town of Newman, and approximately 8 km to the south of the Companys existing Mining Area C operation.

  • BHP Statistics & Facts Statista

    26-9-2019· Being a large global mining company, BHP is not free of controversy. In November 2015, a mine waste water dam in south-eastern Brazil owned by BHP and Vale collapsed. It killed at least 17 people, injured more than 50 people, and caused devastating environmental damage to the surrounding area. This text provides general information.

  • BHPBilliton’s Mining Area C gets Increased Operational

    BHP Billiton (BHPBIO) is an Anglo-Australian multinational mining, metals and petroleum company headquartered in Melbourne, Australia. It is the world’s largest mining company measured by 2013 revenues and Australia’s largest company, by revenue. The Pilot Project The Mining Area C operation is an iron ore mine located in the Pilbara region

  • Area C Jobs in Western Australia (with Salaries)

    Area C jobs now available in Western Australia. Apprentice, Housekeeper, Expression of Interest and more on Indeed

  • Mining Area C EPA WA

    Mining Area C Closure Plan (BHP Billiton Iron Ore 2014a), the outcomes and impact predictions do recognise some of these controls, such as a water supply being sourced from proactive dewatering areas and managed aquifer recharge (MAR) to offset the potential impacts from groundwater abstraction

  • Ben Dowling Drill & Blast Superintendent BHP

    View Ben Dowling’s profile on LinkedIn, Mobile Equipment Field Maintenance Supervisor at BHP Billiton, Area C Iron Ore Mine. William Nyholt. William Nyholt Superintendent Mining Production Alternate RM. Superintendent Mining Production at BHP. Katie Serjeantson. Katie Serjeantson

  • Titel: Drill & Blast Superintendent at BHP
  • BHP puts cost, timeframe on its South Flank iron

    26-6-2017· Mike Henry, the chief executive of BHP's Australian mining operations, said the South Flank project offered "attractive returns" and was a "compelling option" to replace Yandi production because it would use existing infrastructure at BHP's Mining Area C operation.

  • Superintendent Mining Production West

    Find out more about Superintendent Mining Production West Mining Area C with WORK180 Endorsed Employer BHP . WORK180 uses cookies to improve your experience. Continue browsing to accept our use of cookies. Got it. the broader Mining Production team,

  • Mining Area C Southern Flank EPA Western

    BHP Billiton Iron Ore Pty Ltd. Proposal description: The proposal is to revise the Mining Area C operation (located approximately 90km WNW of Newman) to include a new satellite ore body which is located approximately 8 km to the south of the existing approved Mining Area C operations.

  • BHP approves $4.5b South Flank iron ore mine in

    14-6-2018· South Flank will use existing infrastructure linked to BHP's Mining Area C mine. While the South Flank approval is a boost for the Western Australian economy, it is also a boost for mineral sands producer Iluka, which has a lucrative royalty stream on production at Mining Area C, which will extend to iron ore produced at South Flank.

  • Area C Mine Jobs in Western Australia (with

    Production Technicians. BHP 4.1. Western Australia. Join our new South Flank ProjectThe South Flank Project is an expansion of BHP's existing Mining Area C hub, The South Flank Project is an expansion of BHP's existing Mining Area C hub, located approximately 130 km by

  • BHP begins early work at $US3.2b The West

    The 80mtpa project, part of BHP’s Mining Area C hub about 92km west-north-west of Newman, will replace production from the mining giant’s Yandi mine, which is expected to reach the end of its economic life in the early to mid 2020s.

  • BHP Billiton on track for record mining production

    BHP Billiton achieves record mining production targets and profits are high You might think that Australian mining has hit the wall owing to the consistent negative press the sector receives. It’s fair to say, however, that the mining and resource sector in Australia is undergoing a massive readjustment after years of ‘good times’.

  • BHP investment in South Flank iron ore

    26-6-2017· “The capital efficiency of South Flank is underpinned by the planned use of existing infrastructure at the Mining Area C operation, which would, if approved, become one of the largest standalone iron ore processing centres in the world, within reach of several billion tonnes of high-grade ore,” Henry said.

  • BHP Billiton Iron Ore Western Australian Overview

    Area C Nelson Point Karratha South Hedland Note: Location of markers is indicative only Existing Operations Our operations include an integrated system of seven mines, more than 1,300 kilometres of rail and two world-class port facilities at Port Hedland. Mines Today, BHP Billiton Iron Ore has seven extensive high-grade hematite iron ore mining

  • Mammoet keeps BHP South Flank iron ore im

    The $3.6 billion South Flank project, around 8 km south of BHP’s existing Mining Area C operation, will replace production from BHP’s Yandi mine, which is nearing the end of its life. The investment into the new mine site will ensure the continued production of high-quality iron ore for more than 25 years, according to BHP.